TUT ~ PTU PASSIONATE ELEGANCE SCRAPKIT

TUT ~ PTU PASSIONATE ELEGANCE SCRAPKIT
ELEMENTS AND PAPERS HERE
TUT BY LADY RAVEN CREATIONS
ÓSarah M A Feldsien
This tutorial was written by myself
Any similarities to other tutorials are purely coincidence
Please give credit to the tut writer and the scrapkit creator
when using this tutorial

Things you will need to do this tutorial:
PTU Passionate Elegance Scrapkit (Link above)
Gold Frame (in defaults)
Mist of Choice
Mask of Choice

Open Mist of Choice, Duplicate and Close

Open 500 X 500 transparent image.

Open ppsatinblue800x600, Copy, Paste into your transparent image.

Copy your Mist, Paste as New Layer, place where desired. Lower Opacity of this layer to 60.

Merge Visible

Use a decorative mask on this layer.

Merge Group

Resize your Mist slightly smaller, Copy, then Paste as New Selection on your image.

New Raster Layer

Arrange, Send to Bottom

Open ppblue5, Copy, Paste as New Selection

New Raster Layer, Arrange, Bring to Top

Open ribbonwithheartbuckle, Resize, Copy, Paste as New Selection and place as desired. Mine is pasted twice. One at the top and one at the bottom of my image.

New Raster Layer

Open bowpink, Resize, Copy, Paste as New Selection and place as desired. Mine is in the Upper left hand Corner.

Open floweryellow, Resize, Copy, Paste as New Selection and place as desired. Mine is in the Lower Right Hand Corner.

Open bowblue, Resize, Copy, Paste as New Selection and place as desired. Mine is in the Upper Right Hand Corner.

Open julaender-silkflower02, Resize, Copy, Paste as New Selection and place as desired. Mine is in the Upper Right Hand Corner.

Open twoheartsentwined, Resize, Copy, Paste as New Selection and place as desired. Mine is in the Lower Right Hand Corner.

Open hearttrio, Resize, Copy, Paste as New Selection and place as desired. Mine is in the Lower Right Hand Corner.

Open HEART FLOWER DARK TEMPLATE CU BY FG, Resize, Copy, Paste as New Selection and place as desired. Mine is in the Lower Left Hand Corner.

Open flowerblue, Resize, Copy, Paste as New Selection and place as desired. Mine is in the Lower Left Hand Corner.

Open passionateelegancetruelove, Resize, Copy, Paste as New Selection and place as desired. Mine is in the Lower Right Hand Corner.

Open passionateelegancestardoodle, Resize, Copy, Paste as New Selection and place as desired. Mine is in the Lower Left Hand Corner.

Open cdcdesignedbutterly, Resize, Copy, Paste as New Selection and place as desired. Mine is in the Lower Left Hand Corner.

Go to the layer with your ribbons.

Open dmktemplate2sdd, Resize, Copy, Paste as New Selection and place as desired. Mine is in the Upper Left Hand Corner.

Open obdballoonsyellowssd, Resize, Copy, Paste as New Selection and place as desired. Mine is copied twice on both the lower corners.

Layers, Merge, Merge Visible

Go to your frames and select the gold frame.

Adjust, Hue and Saturation, Colorize, then adjust it to the color you desire.

Merge Visible

Place Watermark where desired

You’re Done!

Please give credit to Silent Dreamer and I for the tut and scraps!

Import all Into Letter Creator and place as desired

I hope you enjoyed this tutorial as much as I enjoyed creating it!
Brightest Blessings and Darkest Dreams

LadyRavenCreations
ÓSarah Feldsien
To get all my tutorials email saphirevixen@gmail.com and place YOUR TUTS in the subject!
Or go to http://ladyravencreationstutorials.blogspot.com/

TUT ~ PTU ~ DONT TREAD ON ME

TUT ~ PTU DON’T TREAD SCRAPKIT
ELEMENTS AND PAPERS HERE
TUT BY LADY RAVEN CREATIONS
ÓSarah M A Feldsien
This tutorial was written by myself
Any similarities to other tutorials are purely coincidence
Please give credit to the tut writer and the scrapkit creator
when using this tutorial

Things you will need to do this tutorial:
Elements and Papers for Don’t Tread On Me Scrapkit (link above)
Tube of Choice

Open Tube of Choice, Duplicate and close.

Open burntpaper, rename to what you will be saving your image as, resize and make the canvas 500 X 500.
Copy your tube, and paste as New Layer and move to desired location.

New Raster Layer, Send to Bottom

Open donttreadppcracked, Copy and close, with your copied image, Seamless Tiling, Default.

Copy this new image, select your tag image, Selections, Select All, Select the bottom layer, Paste Into Selection.

Select the burntpaper layer.

Open donttreaddoodle1, Resize as desired, Copy, then paste as New Selection and place where desired. Mine is in the Upper right hand corner.

Open donttreadwhenthedaycomeswordart, Resize as desired, Copy, then paste as New Selection and place where desired. Mine is in the bottom right hand side.

Open your tube of choice, Resize as desired, Copy, then paste as New Selection and place where desired. Mine is placed so she is posing on top of the wordart.

New Raster Layer

Open donttreaddoubleheart, Resize as desired, Copy, then paste as New Selection and place where desired. Mine is on the Lower left hand Corner.

New Raster Layer

Arrange, Move Down (just under the double hearts)

Open donttreadheart1, Resize as desired, Copy, then paste as New Selection and place where desired. I duplicated it twice so it’s under both ends of the double heart.

New Raster Layer, Arrange, Move to Top

Open blackrose, Resize as desired, Copy, then paste as New Selection and place where desired. Mine is right on top of the hearts.

Open deepmauverose, Resize as desired, Copy, then paste as New Selection and place where desired. Mine is on top of the black rose.

Open donttreadribbonpre, Mirror, then Resize as desired, Copy, then paste as New Selection and place where desired. Mine is in the Upper Left Hand Corner.

Open donttreadbow, Rotate 45 degrees to the left. Resize as desired, Copy, then paste as New Selection and place where desired. Mine is on top of the ribbons.

Open butterfly, Resize as desired, Copy, then paste as New Selection and place where desired. Mine is on top of the bow.

Open butterflycream, Resize as desired, Copy, then paste as New Selection and place where desired. Mine is in the bottom right hand corner.

Open butterflyblack, Resize as desired, Copy, then paste as New Selection and place where desired. Mine is in the upper right hand corner.

Now Merge Visible, Place Watermark

You’re DONE!

Please give credit to Silent Dreamer and I for the tut and scraps!

Import all Into Letter Creator and place as desired

I hope you enjoyed this tutorial as much as I enjoyed creating it!
Brightest Blessings and Darkest Dreams

LadyRavenCreations
ÓSarah Feldsien
To get all my tutorials email saphirevixen@gmail.com and place YOUR TUTS in the subject!Or go to http://ladyravencreationstutorials.blogspot.com/

~HOT SLUSHI TUTORIAL ~

HOT SLUSHI TUTORIAL
FTU KIT
Copyright November 11, 2008 Sarah M A Feldsien

This tutorial was written by me and any resemblance to any other is purely coincidence.

MATERIALS:
PSP 10
HotSlushi Scrapkit FTU HERE By Aurien
Grunge type Mask of choice
Tube of choice

LET’S BEGIN
Move this arrow around so you know where you are J

First Open up your tube, Duplicate then close original

Next we will open up a new 500 X 500 image.

Flood Fill White

New Raster Layer

Open DA_HSPaper1 and Copy this, then paste into your document as New selection and place as desired. Close original. Deselect the

Next use your grunge mask on this layer only. Merge Group only.

Now make this layer 30% transparent.

New Raster Layer

Open DA_HSFrame2, resize as desired, Copy this, then paste 3 times side by side into your image and deselect.

Now New Raster Layer again, move this right below the 3 frames side by side.

Copy only certain parts into the two side boxes. I did the head. Then duplicated the layer and mirrored it.

Next, New Raster Layer on top of the frames.

Now copy your whole tube and place in the center of the 3 frames.

Now you can close your tube as we won’t be using it again.

New Raster Layer

Next open DA_HSVine1, Copy, paste into the image where desired. I placed mine both under the frames on top, and over the frames on the bottom of the image.

Next Open DA_HSFan2, copy and then place in your image as desired, mine is in the center of the 2 vines on the bottom.

Next Open DA_HSRose1, copy, then place in your image as desired, I placed one at the bottom of the fan, then mirrored it and placed it as a mirror image at the bottom of the fan as well.

Next Open DA_HSButterfly1, copy, then place as desired, mine is between the two roses on the bottom.

Next Open DA_HSFlower6, copy, place as desired, mine is on the bottom left hand side of the roses.

Next Open DA_HSRose2, copy and place as desired, mine is on the bottom right hand side of the roses.

Next Open DA_HSFlower4, copy and place as desired, mine is at the top of the image where the vines intersect.

Next Open DA_HSBow2, copy and place as desired, mine is right at the top of the dangle we just placed.

Next Open DA_HSFlower5, copy and place as desired, mine is in the center of the bow.

Next Open DA_HSButterfly3, copy and place as desired. Mine is in the upper left hand corner of the frames.

Next Open DA_HSButterfly2, copy and place as desired, mine is in the upper right hand corner of the frames.

Lastly, merge all layers and place your watermark!

YOU’RE DONE!!

I hope you enjoyed this tutorial as much as I enjoyed creating it!
Brightest Blessings and Darkest Dreams

LadyRavenCreations
ÓSarah Feldsien
To get all my tutorials email saphirevixen@gmail.com and place YOUR TUTS in the subject!Or go to http://ladyravencreationstutorials.blogspot.com/