LadyRavenCreations Tutorials

NEW CT WORKS!!!

2010-01-16T13:30:00.001-08:00

This fantastic Tag was made by Aggela!!!

Her tutorial is HERE!

My Kit Vday Funk is HERE!

This awesome tag was also made by Aggela!

Her tutorial is HERE !

My kit Beautiful Corruption is HERE !

This Awesome tag was made by Krimson Tearz!

Here Tutorial is HERE !

My Scrapkit VDay Funk is HERE !

This fantastic Tag was made by Lisa!

Thanks babe!!

She used my Beautiful Corruption Kit available HERE !

This fantastic Tag was made by Savage!
Thanks babe!!
She used my Beautiful Corruption Kit available HERE !

This awesome ta was made by Krimson Tearz!
Her tutorial is HERE !
My kit Beautiful Corruption is HERE !

This fantastic Tag was made by Hypo!
Thanks babe!!
She used my Shadowed Ice Kit available HERE !

All of these works were made by my awesome CT TEAM!!!
Way to go girls!
Thank you so much all of you for all your hard work and dedication!
XoXo
LadyRaven

MY ETSY STORE!!

2009-12-16T10:28:00.001-08:00

TC MISTED FANTASY TUTORIAL

2009-07-12T20:42:00.000-07:00

TC MISTED FANTASY TUTORIAL

Lady Raven Creations

Tutorial level : Intermediate

This tutorial was written by myself and any resemblance to any other is purely coincidence!

Materials:

Tube of Choice

PSP 9 or greater

Mask of Choice

Step 1:

Open your tube of choice

I’m using the art work of DicVicBarnes

Copy and close the original

Shrink for now

Open new 550 X 500 Raster image

Step 2:

Open paper tc9

Copy

Go to your raster image

Selections -> Select all

Paste Into Selection

Select None

Apply your mask to this layer

Step 3:

Open frame tc_frame*

Resize to your liking

Copy

Back to image

Paste as New Layer

New Raster Layer

Send to bottom

Step 4:

Open paper tc10

Copy

Back to image

Select All

Paste Into Selection

Select None

Step 5:

Go to top Layer

New Raster Layer

Make your tube active again

CopyPaste as New Selection on your image

Move to center

Erase any parts that are hanging over the bottom of the frame

Deselect (Ctrl D)

Step 6:

Create New Layer Behind your tube

Open tootsiecreationz_16

Copy

Paste at top left of frame

Step 7:

Open tootsiecreationz_52

Copy

Paste as New Selection over the 16 Bling on top left

Step 8:

Open tootsiecreationz_57

Copy

Paste as New Selection on top right corner

Step 9:

Select Top layer

Open tc_bearbow2

Copy

Paste as New Selection on the bottom middle of frame

Step 10:

Open tootsiescreationz_50

Resize as needed

Copy

Back to image

Paste as New Layer

Move to bottom left of your image

Duplicate

Mirror

Merge the bling layers together

Step 11:

Open tootsiescreationz_12

Copy

Paste as New Selection into bottom center

Step 12:

Open tootsiescreationz_15

Copy

Go to layer just below your tube once more

Paste as New Selection in the curl of the bling on the right

Step 13:

Back to the top Layer

Open tc_unicorn3

Resize as needed

Copy

Paste as New Selection on bottom right

Step 14:

Open tc_bear1

Resize as needed

Copy

Paste as New Selection on the bottom left Corner

Open tc_bear2

Resize slightly smaller than first bear

Copy

Paste as New Selection right next to bigger blue bear

Open tootsiescreationz_37

Resize as needed

Copy

Paste on bottom left to the left of the bears.

Step 15:

Add Borders All sizes 5

Light color from tube

Step 16:

Place Watermark where desired.

Place any pertinent copyright info where needed.

I hope you enjoyed this tutorial by LadyRavenCreations!

Email me at saphirevixen@gmail.com for questions/concerns.

Lady Raven Creations

DA REALVINTAGE TUTORIAL

2009-06-22T14:52:00.001-07:00

DA REAL VINTAGE TUTORIAL

Sarah Feldsien

Lady Raven Creations

Tutorial level : Intermediate

This tutorial was written by myself and any resemblance to any other is purely coincidence!

Materials:Square Decorative Mask of your choosing

Tube of ChoiceI am using Jodephine Wall

PTU Scraptkit Real Vintage by Distinctively Auri available Here

Step 1:
Open the tube of choice in PSP

Pick a light and dark Color for your mask

Open a 550 X 500 Raster Image

Step 2:

Open DA_RVFrame2

Resize as desired

Copy

Paste as New Layer

Step 3:

Flood Fill the bottom layer with a dark color from your tube

Apply the mask to this layer

Merge GroupImage -> Resize (picture size but 10 pixels)

Do not resize all layers!

New Raster Layer

Step 4:

Open DA_RVBook8

Free Rotate Right 45 degrees

Copy

Paste as New Selection and place behind the frame

Select your frame layerNew Raster Layer

Step 5:

Open tube of choice

Copy

Paste as New Layer

Move to center of frame and erase any over lapping parts on the bottom.

Step 6:

Open DA_RVRibbonWrap2

Resize as needed

Copy

Paste as New Layer

Move to bottom of the frame

Open DA_RVTag2

Copy

Paste as New Selection and move to upper right hand corner of the frame

Open DA_RVDoodle2

Copy

Paste as New Selection and move to upper left hand corner of the frame.

Step 7:

Open DA_RVTag3

Copy

Paste as New Layer

Move to left bottom corner

Open DA_RVJournal2

Copy

Paste as New Selection

Place in center bottom of frame

Open DA_RVFlower2

Copy

Paste as New Selection on the bottom right of frame

Step 8:

Open DA_RVDoodle4

Copy

Paste as New Layer

Move to center left of frame

Open DA_RVDoodle3

Copy

Paste as New Selection upper left corner

Open DA_RVElement1

Copy

Paste as New Selection upper right corner

Step 9:

Image-> Add Borders

5 pixels all around

Choose a dark color from your tube

Step 10

Place Watermark where desired.

Place any pertinent copyright info where needed.

I hope you enjoyed this tutorial by LadyRavenCreations!Email me at saphirevixen@gmail.com for questions/concerns.

EVERYTHING’S BLACK N WHITE TUTORIAL

2009-06-05T11:16:00.001-07:00

EVERYTHING’S BLACK N WHITE TUTORIAL
Copyright JUNE 5, 2009 Sarah Feldsien
Lady Raven Creations

Tutorial level : Intermediate

This tutorial was written by myself and any resemblance to any other is purely coincidence!

Materials:
Round Decorative Mask of your choosing
Tube of Choice
I am using Toon Hertz Artwork
PTU Scraptkit Everything’s Black N White by
Sassy’sImagination available HERE

Step 1:
Open Papers Image8 and Image 6
Copy both and close originals

Step 2:
Open a New 550 X 500 Raster Image
Selection -> Select All
Copy the Black Background
Paste Into Selection
Select None
New Raster Layer
Selection -> Select All
Copy the White Background
Paste Into Selection
Select None
Apply your Mask to the White Layer.
Merge Group

Step 3:
Open B8
Copy and Close without saving
Paste Into Selection as New Layer

Step 4:
Open your tube
Copy and Close
Paste As New Layer
Erase any parts hanging over the bottom of the frame.

Step 5:
Open Image 86
Resize as Needed (40% for mine)
Copy and Close
Paste as New Selection on the Frame Layer
Place so it appears to be attached to the Bow on the frame

Step 6:
Open b12
Resize as desired (mine is at 40%)
Copy and Close
Paste as New Selection on the upper right hand corner of the frame

Step 7:
Open Image85
Resize to 40% (or as desired)
Copy and close
Paste as New Selection and place so it looks like it’s coming out of the white bow.

Step 8:
Go to your Tube Layer
New Raster Layer
Open flr1
Resize as desired (mine 80%)
Copy and Close
Paste as New Selection on the Bottom Left Corner

Step9:
Open Flower9
Resize as needed
Copy and Close
Paste as New Selection in the Center on the bottom

Step 10:
Open Flower7 and Flower8
Copy both and Paste as New Selection and place on opposite sides of your graphic.

Step 11:
Merge All Flatten
Add Borders ~ Set all areas to 5 and pick white

Place Watermark where desired.
Place any pertinent copyright info where needed.

I hope you enjoyed this tutorial by LadyRavenCreations!
Email me at saphirevixen@gmail.com for questions/concerns.

Copyright May 28, 2009 Sarah Feldsien
Lady Raven Creations

FIRST AWARD!

2009-06-04T08:07:00.001-07:00

Thanks so much to Auri at Distinctively Auri for this award!!

You made my year babe!

So sweet!

So the rules say to pass on to others!

I'm giving the award to:

Granny at : Granny Art

Kathy at: KCVisions

And that's pretty much it for people I know besides Auri LOL

And of course babe if you didnt' already have it I'd give it to you!

Thanks Auri!!

Mistress Zendraya

ESSY SAKURATS TUTORIAL

2009-05-31T14:54:00.001-07:00

ESSY SAKURATS TUTORIAL

Lady Raven Creations

Tutorial level : Intermediate

This tutorial was written by myself and any resemblance to any other is purely coincidence!

Materials:

Circle Decorative Mask of your choosing

Tube of your choice

I’m using the gorgeous artwork of Zindy which you can find here

PTU Sakurats Kit by Essy available Here

PSP 9 or greater

Step 1:

Open New 550 X 500 Raster Image

Flood Fill with a dark color from your tube

New Raster Layer

Selections -> Select All

Step2:

Open sakurapaper16_es

Seamless Tile Default

Copy

Paste Into Selection

Deselect

Place Mask on this layer

Merge Group

New Raster Layer

Step 3:

Open sakurapaper11_es

Copy

Paste as New Selection

Erase all areas that come out of the center of the frame.

New Raster Layer.

Step 4:

Open Tube of Choice

Copy

Paste Into Selection

Erase areas that come out of the bottom of the frame.

Step 5:

Open sakuraribbon10_es

Mirror

Copy

Paste as New Selection where desired.

Open sakuraribbon11_es

Copy

Paste as New Selection where desired.

Open sakurasequins_es

Copy only 1 sequin

Resize

Copy

Paste as New Selection in the center of both ribbons.

Step 6:

Open sakuradoodle1_es

Resize and copy

Paste as New Selection on the left side

Back to doodle

Mirror and copy

Paste as New Selection on the right side.

Step 7:

Open sakuraribbon7_es

Flip and resize

Copy

Paste as New Selection on bottom.

Step 8:

Open sakurafan1_es

Resize and copy

Paste as New Selection on the bottom left.

Step 9:

Open sakuratag4_es

Rotate Left

Resize and Copy

Paste as New Selection on the bottom right

Step 10:

Open sakurajfhrt2_es

Resize and copy

Paste as New Selection on the bottom left

Open sakurajfhrt1_es

Mirror, Resize and copy

Paste as New Selection on the bottom left to the right of the white heart.

Step 11:

Open sakurabow4_es

Rotate Left

Resize and Copy

Paste as New Selection on the tag

Step 12:

Open sakurabf4_es

Free rotate - 45 degrees - right

Resize and copy

Paste as New Selection where desired

Open sakurabf2_es

Mirror, resize and copy

Paste as New Selection where desired.

Open Open sakurabf3_es

resize and copy

Paste as New Selection where desired.

Step 13:

Merge Visible

Add Borders , all settings to 5, light color from tube.

Place Watermark where desired.

Place any pertinent copyright info where needed.

I hope you enjoyed this tutorial by LadyRavenCreations!Email me at saphirevixen@gmail.com for questions/concerns.

TC GOTH LOVER TUTORIAL

2009-05-31T14:19:00.000-07:00

TC GOTH LOVER TUTORIAL

Lady Raven Creations

Tutorial level : Intermediate

This tutorial was written by myself and any resemblance to any other is purely coincidence!

Materials:

Circle Decorative Mask of your choosing

Tube of your choice

I’m using the gorgeous artwork of Elias Chatzoudis which you must purchase a license to use and can find here

PTU Goth Lover Kit by Tootsie available Here

PSP 9 or greater

Step 1:

Open New 550 X 500 Raster Image

Flood Fill BlackNew Raster Layer

Step 2:

Open tc_paper7

Seamless Tile Default

Copy

In your Raster Image

Selection -> Select All

Paste Into Selection

Select None

Apply Mask to this layer

Merge Group
New Raster Layer

Step3:

Open tc_frame8

Resize

Copy and close

Paste as New Layer

(blank layer should be underneath)

New Raster Layer

Step 4:

Open tc_heartlink1

Resize as needed

Copy but KEEP OPEN

Paste as New Selection on the Layer BEHIND the frame at the top of the frame.

Select none

Step 5:

Open your tube of choice.

Copy and close

Paste as New Selection on the Layer on top of the frame.
New Raster Layer

Step 6:

Open tc_strap2

Resize

Copy and close

Paste as New Selection on the bottom

Step 7:

Back to tc_heartlink1

Copy and close

Paste as New Selection on top of the strap.

Step8:

Open tc_pendant1

Resize

CopyPaste as New Selection

Mine is both on the top layer and on the frame layer

Step 9:

Open Tc_starswirl1

Resize

Copy and close

Paste as New Selection on bottom right

Step 10:

Open tc_starcharm3

ResizeCopy and close

Paste as New Selection

Mine are on the top right and bottom left.

Step 11:

Open tc_string1

Copy and close

Paste as New Selection

Mine are at both bottom corners

Step 12:

Open Tc_flower7

Resize the flower only

Copy and close the whole thing

Paste as New Selection at the bottom right corner.

Step 13:

Open tc_clip1

Resize

Copy and close

Paste as New Selection at the top right

Step 14:

Open tc_butterfly6

Resize as needed

Free rotate - 45 degrees - right

Copy and close

Paste as New Selection on bottom left

Step 15:

Open tc_butterfly4

Resize as needed

Free rotate - 45 degrees - left

Copy and close

Paste as New Selection on bottom right

Step 16:

Merge all and Flatten

Place Watermark where desired.

Place any pertinent copyright info where needed.

I hope you enjoyed this tutorial by LadyRavenCreations!Email me at saphirevixen@gmail.com for questions/concerns.

A FAIRIES BREATH OF SUMMER TUTORIAL

2009-05-31T13:44:00.000-07:00

A FAIRIES BREATH OF SUMMER TUTORIAL

Lady Raven Creations

Tutorial level : Intermediate

This tutorial was written by myself and any resemblance to any other is purely coincidence!

Materials:

Square Decorative Mask of your choosing

Tube of your choice

I’m using the gorgeous artwork of No Flutter which you can find here

PTU A Fairies Breath of Summer Kit by JosDZigns available Here

PSP 9 or greater

Step 1:

Open New 550 X 500 Raster Image

Step 2:

Open Papers 3, 4 and 11

Seamless tile on all 3

Go to your Raster Image

Selections - Select All

On Paper 3

Copy and close

Paste Into Selection

New Raster Layer

Paper 11

Copy and Close

Paste Into Selection

New Raster Layer

Paper 4

Copy and Close

Paste Into Selection

Select None

Step 3:

On Layers that Papers 11 and 4 are on

Apply your mask.

On Layer 4

Resize to 90%, all layers UNCHECKED.

New Raster Layer

Step 4:

Open Green FrameResize as needed

Copy and close

Paste as New Selection in the center of the image.

New Raster Layer

Step 5:

Open Tube of choice

Resize

Copy and close

Paste as New Selection in center of frame

Erase anything hanging over the bottom of the frame

New Raster Layer

Step 6:

Open Rust Glitter Doodle

Resize as needed

CopyPaste as New Selection on one side of the frame

Go back to Rust Glitter Doodle

Mirror

Copy and close

Paste as New Selection on the opposite side of the frame

Step 7:

Open Green Glitter Doodle

Resize as needed

Copy and close

Paste as New Selection in the center of the bottom of the frame

New Raster Layer

Step 8:

Open Green Tag

Free Rotate ~ 45 degrees ~ Right

Resize as needed

Copy and close

Paste as New Selection on the left hand bottom corner of the frame.

Step 9:

Open Brown Tag

Rotate Left

Resize as needed

Copy and Close

Paste as New Selection on the right hand bottom corner of the frame.

Step 10:

Open Stick Pin_02

Resize as needed

Copy and close

Paste as New Selection on the Brown Tag

New Raster Layer

Step11:

Open Tan Bow

Free Rotate ~ 45 degrees ~ Right

Resize

Copy and Close

Paste as New Selection on the Green Tag

Step 12:

Open Strip Bow

Resize as needed

Copy and close

Paste as New Selection in the bottom center.

Step13:

Open Butterfly_02

Resize as needed

CopyPaste as New Selection where desired

Step 14:

Open Butterfly_01

Resize as needed

CopyPaste as New Selection where desired

Step 15:

Open Green Dragonfly

Resize as needed

CopyPaste as New Selection where desired

Step 16:

Open Fairy Sparkles

Resize as needed

You can copy part or all of the sparkles and place as desired.

Step 17:

Merge Visible

Add Borders ~ Set all areas to 5 and pick a dark green

Place Watermark where desired.Place any pertinent copyright info where needed.

I hope you enjoyed this tutorial by LadyRavenCreations!Email me at saphirevixen@gmail.com for questions/concerns.

ÓMay 28, 2009 Sarah FeldsienLady Raven Creations

ROO FEELIN FROGGY TUTORIAL

2009-05-31T13:10:00.000-07:00

ROO FEELIN FROGGY TUTORIAL

Lady Raven Creations

Tutorial level : Intermediate

This tutorial was written by myself and any resemblance to any other is purely coincidence!

Materials:

Square Decorative Mask of your choosing

PTU Feeling Froggy Kit by ROO available Here

PSP 9 or greater

Step 1:

Open a new 550 X 500 Raster Image

Step 2:

Open FeelinFroggyPapers~11

Seamless Tile Default

Copy and close without saving

Go to your raster image

Selection ->Select All

Paste Into Selection

Select None

New Raster Layer

Step 3:

Open FeelinFroggyPapers~16

Copy and close

In your image, Selections -> Select All

Paste Into Selection

Ctrl D (select none)

Use your mask on this layer

Merge Group.

New Raster Layer

Step 4:

Open FeelingFroggyFrames~02

Resize as needed

Copy and close without saving

Paste as New Layer

Step 5:

Open FeelingFroggyElements~03

Resize as needed

Copy and Close without saving

Paste as New Selection

Place so that the head is slightly off center

Erase the bottom parts hanging over the frame.

Step 6:

Open FeelingFroggyElements~04

Resize smaller than the other frog.

Free Rotate ~ 45 degrees ~ Right

Copy and Close without saving

Paste as New Selection

Place to the right of the other frog

Step 7:

Open FeelingFroggyElements~09

Resize MUCH smaller than the other 2 so he looks like their baby.

Copy and close without saving

Paste as New Selection over the frog of the frame.

Step 8:

Open FeelingFroggyElements~18

Resize as needed

Free Rotate ~ 45 degrees ~ Right

Copy

Paste as New Selection on the lower left hand side of the frame

Go back to FeelingFroggyElements~18

Undo

Free Rotate ~ 45 degrees ~ left

Copy and close without saving

Paste as New Selection on the lower right side of the frame

Step 9:

Open FeelingFroggyElements~22

Resize as needed

Copy and close without saving

Paste as New Selection slightly off center to the right of the tags.

Step 10:

Open FeelingFroggyElements~24

Resize as needed

Copy and close without saving

Paste as New Selection slightly off center to the left of the tags.

Step 11:

Open FeelingFroggyWordArt~03

Resize as needed

Copy and Close without saving

Paste as New Selection just below the bows.

Step 12:

Open FeelingFroggyWordArt~01

Resize as needed

Free Rotate ~ 45 degrees ~ Left

Copy and close without saving

Paste as New Selection on the Right Tag.

Step 13:

Open FeelingFroggyWordArt~04

Resize as needed

Copy

You may repeat this for as many sizes as you want

To rotate, use free rotate and use whatever settings you desire

Paste as New Selection

Step 14:Layers Merge Visible

Place Watermark where desired.Place any pertinent copyright info where needed.

I hope you enjoyed this tutorial by LadyRavenCreations!

Email me at saphirevixen@gmail.com for questions/concerns.

HS STRAWBERRY FIELDS TUTORIAL

2009-05-19T13:26:00.000-07:00

HS STRAWBERRY FIELDS TUTORIAL
Copyright May 19, 2009 Sarah Feldsien
Lady Raven Creations

Tutorial level : Intermediate

This tutorial was written by myself and any resemblance to any other is purely coincidence!

Supplies Needed:
PSP 9 or better
Animation Shop
PTU Kit HS Strawberry Fields available here
Tube of choice
Round Mask of Choice

Begin by opening a new 600 X 450 raster image.
Open HS-StrawberryFields-Paper1
Copy and close
Go back to your image
Select all
Paste into selection

Now find a decorative ROUND mask to use
Apply the mask to this layer.
Merge Group
New Raster Layer

Open HS-StrawberryFields-Frame3
Resize to desired size.
Mine is at 50%
Copy and Close without saving
Back to your image
Paste as New Selection

Open HS-StrawberryFields-Frame4
Resize to desired size.
Mine is at 50%
Copy and Close without saving
Back to your image
Paste as New Selection on top of the other frame but slightly off center.

Open Tube of choice
Resize as desire
I’m using the beautiful work of Elias Chatzoudis
Copy and close without saving
Then go back to your image
Paste in the center and crop the bottom so it appears to be coming out of the frames.

Open HS-StrawberryFields-Ruffle2
Resize as desired
Mine is at 60%
Copy and close without saving
Back to your image
Paste as New Selection
Mine is on the bottom of the frames

Open HS-StrawberryFields-FlowerVine1
Resize also as desired.
Copy
Back to your image
Paste as New Selection
Mine is on the right side

Now back to the HS-StrawberryFields-FlowerVine1
Mirror
Copy and close without saving
Back to your image
Paste as New Selection
Mine is on the left side

Open HS-StrawberryFields-CallaLilies1
Resize also as desired.
Copy
Back to your image
Paste as New Selection
Mine is on the right side

Now Back to HS-StrawberryFields-CallaLilies1
Mirror
Copy and close without saving
Paste as New Selection
Mine is on the left side

Open HS-StrawberryFields-Bow3
Resize
Free Rotate Left
Copy
Back to image
Paste as New Selection
Mine is on the left on top of the Lilies and Vines.

Back to HS-StrawberryFields-Bow3
Mirror
Copy and Close without saving
Back to Image
Paste as New Selection
Mine is on the right on top of the Lilies and Vines.

Open HS-StrawberryFields-Blossom1
Resize as desired.
Copy
Go back to the bottom layer of your graphic
New Raster Layer
Paste as new selection behind the frames where desired to accent the tube.
Crop what is left hanging out of the image.
Merge Down.

Open HS-StrawberryFields-GlitterDust
Resize as desired.
Copy
Go back to your image.
Go to the bottom layer again
New Raster Layer
Paste as New Selection where desired
Mirror to balance.
Duplicate Layer
Go to top layer
New Raster Layer
Place where desired as New Selection
Mirror to balance.
Duplicate Layer.

Go to the Bottom 2 Glitter Layers and rename them 1 and 2.
Go to the Top 2 Glitter Layers and rename them 11 and 22.

Hide Layers 2 and 22.

On Layers 1 and 11 perform the following actions.
Effects -> Effects Browser -> Noise -> Low

Now Hide layers 1 and 11

Open Layers 2 and 22

On Layers 2 and 22 perform the following actions.
Effects -> Effects Browser -> Noise -> Medium

Now go to your top Layer just below 22
Put any copyright info needed
This should be the layer with your tubes and such on it.

Hide 2 and 22 and reopen 1 and 11.
Save as Jpeg
Example StrawberryFields1

Hide 1 and 11 and reopen 2 and 22.
Save as Jpeg
Example StrawberryFields2

Open Animation Shop
Use the Animation Wizard and open both graphics.
Save as .gif

You’re DONE!

The Font I used to finish is SP SPENCE

I hope you enjoyed this tutorial by LadyRavenCreations!
Email me at saphirevixen@gmail.com for questions/concerns.

Copyright May 19, 2009 Sarah Feldsien
Lady Raven Creations

UMDFD SUMMER TUTORIAL

2009-05-13T09:58:00.000-07:00

UMDFD SUMMER TUTORIAL
Copyright May 13, 2009 Sarah Feldsien
Lady Raven Creations

Tutorial level : Intermediate

This tutorial was written by myself and any resemblance to any other is purely coincidence!

Supplies needed:
PSP 7 and up
PTU Scrapkit by Urban Mermaid Designs available here
Tube of choice
I am using the lovely artwork of Ana Rasha
Her work can be seen here

After downloading her kit open UMD_FDSu_Paper4
Copy and close this
Seamless tiling default
Copy

Open a new 500 X 450 Raster Image

Selections -> Select All
Edit -> Paste -> Paste Into Selection
Selections -> Select None

New Raster Layer

Open UMD_FDSu_Tree
Copy
Go back to your image
Paste as New Selection and deselect

Open UMD_FDSu_Frame1
Resize 115%, Copy
Go back to your image
Paste as New Selection and deselect

Open UMD_FDSu_Bow
Copy
Go back to your image
Paste as New Selection at the top of the frame and deselect

Open your tube of choice
Resize as needed
Go back to your image
Paste as New Selection and deselect

Open UMD_FDSu_Element2
Resize to 50%
Rotate Left
Copy
Go back to your image
Paste as New Selection on bottom right and deselect
Go back to UMD_FDSu_Element2
Mirror
Copy
Go back to your image
Paste as New Selection on bottom right and deselect

Open UMD_FDSu_Flower3
Copy
Go back to your image
Paste as New Selection on bottom right and deselect

Open UMD_FDSu_Flower4
Copy
Go back to your image
Paste as New Selection on bottom right and deselect

Image -> Add Borders
5 on all points
Okay

The Font I used to finish is SA Dots

I hope you enjoyed this tutorial by LadyRavenCreations!
Email me at saphirevixen@gmail.com for questions/concerns.

Copyright May 13, 2009 Sarah Feldsien
Lady Raven Creations

TUT ~ PTU PASSIONATE ELEGANCE SCRAPKIT

2008-11-18T17:25:00.001-08:00

TUT ~ PTU PASSIONATE ELEGANCE SCRAPKIT
ELEMENTS AND PAPERS HERE
TUT BY LADY RAVEN CREATIONS
ÓSarah M A Feldsien
This tutorial was written by myself
Any similarities to other tutorials are purely coincidence
Please give credit to the tut writer and the scrapkit creator
when using this tutorial

Things you will need to do this tutorial:
PTU Passionate Elegance Scrapkit (Link above)
Gold Frame (in defaults)
Mist of Choice
Mask of Choice

Open Mist of Choice, Duplicate and Close

Open 500 X 500 transparent image.

Open ppsatinblue800x600, Copy, Paste into your transparent image.

Copy your Mist, Paste as New Layer, place where desired. Lower Opacity of this layer to 60.

Merge Visible

Use a decorative mask on this layer.

Merge Group

Resize your Mist slightly smaller, Copy, then Paste as New Selection on your image.

New Raster Layer

Arrange, Send to Bottom

Open ppblue5, Copy, Paste as New Selection

New Raster Layer, Arrange, Bring to Top

Open ribbonwithheartbuckle, Resize, Copy, Paste as New Selection and place as desired. Mine is pasted twice. One at the top and one at the bottom of my image.

New Raster Layer

Open bowpink, Resize, Copy, Paste as New Selection and place as desired. Mine is in the Upper left hand Corner.

Open floweryellow, Resize, Copy, Paste as New Selection and place as desired. Mine is in the Lower Right Hand Corner.

Open bowblue, Resize, Copy, Paste as New Selection and place as desired. Mine is in the Upper Right Hand Corner.

Open julaender-silkflower02, Resize, Copy, Paste as New Selection and place as desired. Mine is in the Upper Right Hand Corner.

Open twoheartsentwined, Resize, Copy, Paste as New Selection and place as desired. Mine is in the Lower Right Hand Corner.

Open hearttrio, Resize, Copy, Paste as New Selection and place as desired. Mine is in the Lower Right Hand Corner.

Open HEART FLOWER DARK TEMPLATE CU BY FG, Resize, Copy, Paste as New Selection and place as desired. Mine is in the Lower Left Hand Corner.

Open flowerblue, Resize, Copy, Paste as New Selection and place as desired. Mine is in the Lower Left Hand Corner.

Open passionateelegancetruelove, Resize, Copy, Paste as New Selection and place as desired. Mine is in the Lower Right Hand Corner.

Open passionateelegancestardoodle, Resize, Copy, Paste as New Selection and place as desired. Mine is in the Lower Left Hand Corner.

Open cdcdesignedbutterly, Resize, Copy, Paste as New Selection and place as desired. Mine is in the Lower Left Hand Corner.

Go to the layer with your ribbons.

Open dmktemplate2sdd, Resize, Copy, Paste as New Selection and place as desired. Mine is in the Upper Left Hand Corner.

Open obdballoonsyellowssd, Resize, Copy, Paste as New Selection and place as desired. Mine is copied twice on both the lower corners.

Layers, Merge, Merge Visible

Go to your frames and select the gold frame.

Adjust, Hue and Saturation, Colorize, then adjust it to the color you desire.

Merge Visible

Place Watermark where desired

You’re Done!

Please give credit to Silent Dreamer and I for the tut and scraps!

Import all Into Letter Creator and place as desired

I hope you enjoyed this tutorial as much as I enjoyed creating it!
Brightest Blessings and Darkest Dreams

LadyRavenCreations
ÓSarah Feldsien
To get all my tutorials email saphirevixen@gmail.com and place YOUR TUTS in the subject!
Or go to http://ladyravencreationstutorials.blogspot.com/

TUT ~ PTU ~ DONT TREAD ON ME

2008-11-18T11:56:00.001-08:00

TUT ~ PTU DON’T TREAD SCRAPKIT
ELEMENTS AND PAPERS HERE
TUT BY LADY RAVEN CREATIONS
ÓSarah M A Feldsien
This tutorial was written by myself
Any similarities to other tutorials are purely coincidence
Please give credit to the tut writer and the scrapkit creator
when using this tutorial

Things you will need to do this tutorial:
Elements and Papers for Don’t Tread On Me Scrapkit (link above)
Tube of Choice

Open Tube of Choice, Duplicate and close.

Open burntpaper, rename to what you will be saving your image as, resize and make the canvas 500 X 500.
Copy your tube, and paste as New Layer and move to desired location.

New Raster Layer, Send to Bottom

Open donttreadppcracked, Copy and close, with your copied image, Seamless Tiling, Default.

Copy this new image, select your tag image, Selections, Select All, Select the bottom layer, Paste Into Selection.

Select the burntpaper layer.

Open donttreaddoodle1, Resize as desired, Copy, then paste as New Selection and place where desired. Mine is in the Upper right hand corner.

Open donttreadwhenthedaycomeswordart, Resize as desired, Copy, then paste as New Selection and place where desired. Mine is in the bottom right hand side.

Open your tube of choice, Resize as desired, Copy, then paste as New Selection and place where desired. Mine is placed so she is posing on top of the wordart.

New Raster Layer

Open donttreaddoubleheart, Resize as desired, Copy, then paste as New Selection and place where desired. Mine is on the Lower left hand Corner.

New Raster Layer

Arrange, Move Down (just under the double hearts)

Open donttreadheart1, Resize as desired, Copy, then paste as New Selection and place where desired. I duplicated it twice so it’s under both ends of the double heart.

New Raster Layer, Arrange, Move to Top

Open blackrose, Resize as desired, Copy, then paste as New Selection and place where desired. Mine is right on top of the hearts.

Open deepmauverose, Resize as desired, Copy, then paste as New Selection and place where desired. Mine is on top of the black rose.

Open donttreadribbonpre, Mirror, then Resize as desired, Copy, then paste as New Selection and place where desired. Mine is in the Upper Left Hand Corner.

Open donttreadbow, Rotate 45 degrees to the left. Resize as desired, Copy, then paste as New Selection and place where desired. Mine is on top of the ribbons.

Open butterfly, Resize as desired, Copy, then paste as New Selection and place where desired. Mine is on top of the bow.

Open butterflycream, Resize as desired, Copy, then paste as New Selection and place where desired. Mine is in the bottom right hand corner.

Open butterflyblack, Resize as desired, Copy, then paste as New Selection and place where desired. Mine is in the upper right hand corner.

Now Merge Visible, Place Watermark

You’re DONE!

Please give credit to Silent Dreamer and I for the tut and scraps!

Import all Into Letter Creator and place as desired

I hope you enjoyed this tutorial as much as I enjoyed creating it!
Brightest Blessings and Darkest Dreams

LadyRavenCreations
ÓSarah Feldsien
To get all my tutorials email saphirevixen@gmail.com and place YOUR TUTS in the subject!Or go to http://ladyravencreationstutorials.blogspot.com/

~HOT SLUSHI TUTORIAL ~

2008-11-11T17:01:00.000-08:00

HOT SLUSHI TUTORIAL
FTU KIT
Copyright November 11, 2008 Sarah M A Feldsien

This tutorial was written by me and any resemblance to any other is purely coincidence.

MATERIALS:
PSP 10
HotSlushi Scrapkit FTU HERE By Aurien
Grunge type Mask of choice
Tube of choice

LET’S BEGIN
Move this arrow around so you know where you are J

First Open up your tube, Duplicate then close original

Next we will open up a new 500 X 500 image.

Flood Fill White

New Raster Layer

Open DA_HSPaper1 and Copy this, then paste into your document as New selection and place as desired. Close original. Deselect the

Next use your grunge mask on this layer only. Merge Group only.

Now make this layer 30% transparent.

New Raster Layer

Open DA_HSFrame2, resize as desired, Copy this, then paste 3 times side by side into your image and deselect.

Now New Raster Layer again, move this right below the 3 frames side by side.

Copy only certain parts into the two side boxes. I did the head. Then duplicated the layer and mirrored it.

Next, New Raster Layer on top of the frames.

Now copy your whole tube and place in the center of the 3 frames.

Now you can close your tube as we won’t be using it again.

New Raster Layer

Next open DA_HSVine1, Copy, paste into the image where desired. I placed mine both under the frames on top, and over the frames on the bottom of the image.

Next Open DA_HSFan2, copy and then place in your image as desired, mine is in the center of the 2 vines on the bottom.

Next Open DA_HSRose1, copy, then place in your image as desired, I placed one at the bottom of the fan, then mirrored it and placed it as a mirror image at the bottom of the fan as well.

Next Open DA_HSButterfly1, copy, then place as desired, mine is between the two roses on the bottom.

Next Open DA_HSFlower6, copy, place as desired, mine is on the bottom left hand side of the roses.

Next Open DA_HSRose2, copy and place as desired, mine is on the bottom right hand side of the roses.

Next Open DA_HSFlower4, copy and place as desired, mine is at the top of the image where the vines intersect.

Next Open DA_HSBow2, copy and place as desired, mine is right at the top of the dangle we just placed.

Next Open DA_HSFlower5, copy and place as desired, mine is in the center of the bow.

Next Open DA_HSButterfly3, copy and place as desired. Mine is in the upper left hand corner of the frames.

Next Open DA_HSButterfly2, copy and place as desired, mine is in the upper right hand corner of the frames.

Lastly, merge all layers and place your watermark!

YOU’RE DONE!!

I hope you enjoyed this tutorial as much as I enjoyed creating it!
Brightest Blessings and Darkest Dreams

LadyRavenCreations
ÓSarah Feldsien
To get all my tutorials email saphirevixen@gmail.com and place YOUR TUTS in the subject!Or go to http://ladyravencreationstutorials.blogspot.com/

TUT ~ PTU DA SHABBYGRUNGE

2008-10-22T16:43:00.001-07:00

TUT ~ PTU DA SHABBYGRUNGE Scrapkit HERE
TUT BY LADY RAVEN CREATIONS
ÓSarah M A Feldsien
This tutorial was written by myself
Any similarities to other tutorials are purely coincidence
Please give credit to the tutorial writer and the scrapkit creator
when using this tutorial

Things you will need to do this tutorial:
ShabbyGrunge Scrapkit By DistinctivelyAuri (Link Above)
Tube of Choice
PSP 10
Animation Shop
Alien Skin Textures

Open Tube of Choice
Duplicate and Close

Open 550 X 550 Raster Image
Open DA_SGFrame1, Copy, Paste as New Layer into your new image then close the frame

Resize your tube you are using
Copy, Paste as New Layer on your image.
Close the tube now

Open DA_SGElement1, Resize, Copy, Paste as New Layer on your new image, Close the Element.

Open DA_SGRose3, Resize, Copy, Paste as New Selection, Mine is on the Element in the bottom right hand corner. Close the Rose.

Open DA_SGRose2, Resize, Copy, Paste as New Selection, Mine is on the other rose in the bottom right hand corner. Close the Rose.

Open New Raster Layer, Move to Layer just below your Frame

Open DA_SGRose1, Resize, Copy, Paste as New Selection, Position as desired, Mine is in the left hand inner corner of the frame. Close the rose.

Select the layer with your frame on it.

Open DA_SGButterfly6, Resize, Copy, Paste as New Selection, Mine is on the left hand side of the frame. Close the Butterfly.

Open DA_SGBowWrap1, Resize, Copy, Paste as New Selection, Mine is on the upper right hand side of the frame. Close the Ribbon.

Open DA_SGButterfly5, Resize, Copy, Paste as New Selection, Mine is on the upper right hand side of the frame on the ribbon. Close the butterfly.

Open DA_SGButterfly3, Resize, Copy, Paste as New Selection, Mine is on the upper Left hand corner of the frame. Close the butterfly.

Open DA_SGEnvelope2, Resize, Copy, Paste as New Selection, Mine is on the lower left hand corner. Close Envelope.

Open DA_SGFlower2, Resize, Copy, Paste as New Selection, Mine is on the lower left hand corner on the Envelope. Close Flower.

Open DA_SGPhotoMat1, Resize, Copy, Paste as New Selection, Mine is on the lower left hand corner on the Frame. Close PhotoMat.

Open DA_SGButterfly1 Resize, Copy, Paste as New Selection, Mine are on the left side no the PhotoMat and then Mirrored on the Flower. Close the Butterfly.

Open DA_SGRose4, Resize, Copy, Paste as New Selection, Mine is on the right hand side of the frame. Close the Rose.

Go to your bottom layer.
Select only the inside of the frame.

Open DA_SGPaper6, Copy, then go to bottom layer and paste as Into Selection.

Duplicate Layer twice.

Select the first one.

Go the your effects and find the Alien Skin Textures, Default texture. Then reduce the opacity on the layer to 50.

Go to second layer and repeat but this time click Random Seed. Opacity 50

Go to third layer and repeat and click random seed again. Opacity 50

Add New Raster Layer and send to bottom. Flood Fill with whatever color you with. This will be the background to your tag.

Go to the top layer and place your watermark.

Send the 2nd and 3rd layers to the bottom.

Save as Jpeg

Send 1st layer to bottom and bring the 2nd one just in front of your background.

Save as Jpeg.

Send 2nd to the bottom and bring the 3rd one just in front of your background.

Save as Jpeg.

Open Animation Shop, open your animation wizard. Import all 3 pics into the animation shop. Save as .gif.

You’re done!
Please give credit to Auri and I for the tut and scraps!

Import all Into Letter Creator and place as desired

I hope you enjoyed this tutorial as much as I enjoyed creating it!
Brightest Blessings and Darkest Dreams

LadyRavenCreations
ÓSarah Feldsien
To get all my tutorials email saphirevixen@gmail.com and place YOUR TUTS in the subject!
Or go to http://ladyravencreationstutorials.blogspot.com/

~ TUT ANTIQUESPLEDOR SCRAP ~

2008-10-15T10:45:00.001-07:00

TUT ~ PTU DA ANTIQUESPLEDOR Scrapkit HERE
TUT BY LADY RAVEN CREATIONS
ÓSarah M A Feldsien
This tutorial was written by myself
Any similarities to other tutorials are purely coincidence
Please give credit to the tut writer and the scrapkit creator
when using this tutorial

Things you will need to do this tutorial:
Auri’s Scrap Kit (Link Above)
Tube of Choice
PSP of Choice
LetterCreator

Open Tube of Choice
Duplicate and Close
Shrink this for now

Open DA_AntiquePaper7 Duplicate Twice and Close
Shrink One for Now

Resize new one to 420 X 420
New Raster Layer

Open your Duplicated Tube
Copy your tube then go back to background image
Paste as New Selection

Deselect (Ctrl D)

Open DA_AntiqueFrame3 and Export to Frames

GO back to your image and Add Border (Black) 10 Pixels

We are going to fill this later so leave it be
Next, Add Frame, Frame Canvas Checked, Frame Outside Image, Checked.

Add Borders (Black) (20)

New Raster Layer

Open DA_AntiqueSwirl1 Resize to desired size, Copy,

Go back to image, Paste as New Selection where desired.

I placed mine at the top on both sides on the frame.

Keep the swirl open and resized (you can close it later without saving)

as we will be using it later.

Open DA_AntiqueBookmark2, Resize as desired, Copy

Return to Image and Paste as New Selection. I pasted

mine at the bottom of the frame to make a name plate for later.

You can now close the Bookmark WITHOUT saving it.

Open DA_AntiqueCandle1, Resize, Copy, Now go to the

layer with your background on it. Paste as New Selection

and move as desire behind your tube.

You can close the Candle without saving as we will not be using it again.

Open DA_AntiqueLace3, Resize, Copy, Go to your layer with your tube on it.

Paste as New Selection, I pasted mine at the top and bottom

just along the inside edges of my frame. Be sure to delete anything

that shows outside the frame edges.

You can close the lace without closing now.

Open DA_AntiqueBrooch2, Resize, Copy, Paste as New Selection.

I pasted mine in the upper righthand corner of my frame.

You can close the Brooch now without saving as well.

Open DA_AntiqueFlower1, Resize, Copy, Go to the top layer

now of your image, Paste as New Selection, I pasted mine

to the left of the Nameplate.

Close the flower without saving.

Open DA_AntiqueFlower2, Resize, Copy, go back to your image

and Paste as New selection, I pasted mine on top of the other flower.

Close this flower without saving as well.

Open DA_AntiqueKey&Chain2, Resize, Copy, go back to your

image and Paste as New selection, I pasted mine on top of the flowers.

Close the KeyChain without saving.

Open DA_AntiqueEnvelope2, Resize, Copy, go back to your

image and Paste as New selection, I pasted mine to the right of the nameplate.

Close the Envelope without saving.

Open DA_AntiqueButterfly3, Resize, Copy, go back to your

image and Paste as New selection, I pasted mine on top of the envelope.

Close the butterfly without saving.

Now Layers, Merge, Merge Visible.

Use your Magic Wand and select the black area around the tag,

Open your background copy 2 that we made at the beginning.

Copy this. Now go back to your image, Paste Into Selection.

Deselect (Ctrl D). Place your water mark as desired.

Open your background 2 again. Open DA_AntiqueSwirl1 that we resized,

Copy the swirl. Go back to background. New Raster Layer.

Paste the swirl a few times as New Selection. Then Deselect (ctrl D).

Lower Opacity of both layers until you are satisfied.

Mine is 42 for the background and 63 for the Swirls.

Merge Visible

Save Both Graphics as JPEGS and Export to Letter Creator.

You’re Done!

I hope you enjoyed this tutorial as much as I enjoyed creating it!
Brightest Blessings and Darkest Dreams

LadyRavenCreations
ÓSarah Feldsien
To get all my tutorials email saphirevixen@gmail.com

and place YOUR TUTS in the subject!
Or go to http://ladyravencreationstutorials.blogspot.com/

~Precious Teal Scrap TUT~

2008-10-10T19:36:00.001-07:00

TUT ~ FTU DA PRECIOUSTEAL Scrapkit HERE
TUT BY LADY RAVEN CREATIONS
ÓSarah M A Feldsien
This tutorial was written by myself
Any similarities to other tutorials are purely coincidence
Please give credit to the tut writer and the scrapkit creator
when using this tutorial

Things you will need to do this tutorial:
DA PRECIOUSTEAL SCRAPKIT BY AURI
TUBE OF CHOICE
Open a 450 X 450 Raster Image
Open Tube of Choice
Duplicate and Close

Open DA Teal Tag 1
Copy
Then Paste twice on your raster image, One in the upper left, one in the lower right

Resize your tube as preferred then Copy and Paste as New Selection into your raster image and place as desired.

Open DA TealFrame resize as desired, Copy, the Paste as New Selection in the center

Open DA TealknotRibbon2, resize, Copy and place as desire. I placed mine at the top.

Open DA Tealbraid1, resize, Copy, Paste as New Selection, I pasted mine twice, once over the ribbon and the second at the bottom

Open DA CutieFly1, resize, Copy, Paste as New selection, Mine was in the lower right hand corner.

Open DA CutieFly2, resize, Copy, Paste as New Selection, Mine is in the Upper lefthand corner.

Open DA TealFlower3, resize, Copy, Paste as New Selection, Mine is in the lower lefthand corner.

Open DA TealFlower4, resize, Copy, Paste as New Selection, Mine is in the lower lefthand corner over #3.

Open DA TealTag2, resize, Copy, Paste as New Selection, Mine is in the upper Middle.

Merge Visible

Place Watermark where desired.

Merge Visible

You can add anything behind it you want.. I left mine blank and exported it to Animation Shop to keep it transparent.

Open DA TealPaper 5
Resize to 1280 X 1280
Seamless tile ~ Multi directional ~ Corners
Save as a jpeg to be your background for your stat.

You’re done!

Import all Into Letter Creator and place as desired

I hope you enjoyed this tutorial as much as I enjoyed creating it!
Brightest Blessings and Darkest Dreams

LadyRavenCreations
ÓSarah Feldsien
To get all my tutorials email saphirevixen@gmail.com and place YOUR TUTS in the subject!
Or go to http://ladyravencreationstutorials.blogspot.com/

~GRUNGE GIRL TUT~

2008-10-10T13:27:00.000-07:00

TUT ~ PTU DA GRUNGE Scrapkit HERE
TUT BY LADY RAVEN CREATIONS
ÓSarah M A Feldsien
This tutorial was written by myself
Any similarities to other tutorials are purely coincidence
Please give credit to the tut writer and the scrapkit creator
when using this tutorial

Things you will need to do this tutorial:
DA GRUNGE SCRAPKIT BY AURI
TUBE OF CHOICE
Open DA Grunge Scroll
Duplicate and close
Tube of choice
Duplicate and close
paste onto scroll as new selection and place where desired

DA Blackrose
Duplicate and close
Copy and copy and paste as new selection and place where desired

DA GrungeTag2 Duplicate and close
Paste as New Image Resize and rotate as desired
Copy and paste as new selection and place where desired

DA GrungeStrip resize and copy and paste as new selection and place where desired
I placed mine at the top and bottom of the tag and did not resize at all but merely moved it to 2 diff spots of the strip.

DA GrungeBow2 resize to 30%, copy then paste and place where desired once rotate 45% paste on top of other bow to create the double bow
I placed my bows at the top of the Grunge Tag

DA GrungeDoodle2 Resize, copy and paste as new selection and place where desired
I placed mine at the top right hand corner of the tag

DA GrungeButterfly Resize, rotate and copy and paste as new selection and place where desired
I placed 2, one over the doodle, resized further and placed the other in the top left

DA GrungeBookplate Resize, rotate and copy and paste as new selection and place where desired
I placed mine over the Grunge Tag2

DA GrungeParchment2 Resize, rotate and copy and paste as new selection and place where desired
I placed mine in the lower right hand corner

DA GrungeFrame2 Resize, rotate and copy and paste as new selection and place where desired
I placed mine over the parchment

Brush Phrase of your choice over first tag

Merge Visible

Place Watermark where desired

MergeVisible

Compress and Save as JPEG

Open DA GrungePaper 6 then resize 1280 X 1280
Use this as your stat background

Import all Into Letter Creator and place as desired

I hope you enjoyed this tutorial as much as I enjoyed creating it!
Brightest Blessings and Darkest Dreams

LadyRavenCreations
ÓSarah Feldsien
To get all my tutorials email saphirevixen@gmail.com

and place YOUR TUTS in the subject!

~ SPRING FEVER TUT ~

2008-10-10T10:23:00.000-07:00

TUT ~ PTU Spring Fever Scrapkit HERE
TUT BY LADY RAVEN CREATIONS
ÓSarah M A Feldsien
This tutorial was written by myself
Any similarities to other tutorials are purely coincidence
Please give credit to the tut writer and the scrapkit creator
when using this tutorial

LEVEL ~ INTERMEDIATE

(you will need a basic understanding of where things are in PSP)

Things you will need to do this tutorial:
SPRING FEVER SCRAPKIT
Mask 0.121
Mask 09-07-swirel
Tube of Choice

First Open SF Paper 10
Duplicate twice and close
Open SF Paper 1
Duplicate once and close
Crop center of Copy1 of Paper 10 (pink)
Resize to 1280 X 525
Shrink for later use
Open Copy 2 of Paper 10 ~ Copy
Click on Copy of Paper 1
Paste as New Layer
Promote Layer 1 to background layer
Send Top layer to Bottom so dark layer is on top
Image Resize 500 X 500
Mask on top layer (pink) 0.121-Wicked
Merge Group
Merge Visible
Mask 09-07-swirel
Merge Group
New Raster Layer
Frame 2 Copy and close
Select Image again
Paste as New Selection
Place where desired
New Raster Layer
Pick Tube of choice
Copy and Close
Paste as New Selection and place where desired
New Raster Layer
Open SF Frame 4
Copy and Close
Paste as New Selection on your tag
Place where desired
Open SF Tag 5
Copy and Close
Paste as New Selection
Place where desired
Open SF Border 2
Duplicate and close
Resize to desired size
Copy
Paste on the Layer with the Pink Frame
Place as Desired
Open SF Butterfly 1
Duplicate and Close
Resize to desired size
Copy and Paste as New Selection on the Tag
New Raster Layer
Arrange ~ Send to Bottom
Flood Fill with your Pink Background
Lower opacity to 40
Merge Visible
Place watermark where desired
Merge Visible
Save as JPEG

Select Your Middle Background you made
Opacity to 60
New Raster Layer
Then Grab SF Swirls ~ The top swirl
Rotate Right
Copy
Paste Into your background
Merge Visible
Image Effects ~ Seamless Tiling ~ Edge ~ Vertical ~ Default
Save as JPEG

Import all Into Letter Creator and place as desired

I hope you enjoyed this tutorial as much as I enjoyed creating it!
Brightest Blessings and Darkest Dreams

LadyRavenCreations
ÓSarah Feldsien
To get all my tutorials email saphirevixen@gmail.com

and place YOUR TUTS in the subject!