TUT ~ PTU DA SHABBYGRUNGE

TUT ~ PTU DA SHABBYGRUNGE Scrapkit HERE
TUT BY LADY RAVEN CREATIONS
ÓSarah M A Feldsien
This tutorial was written by myself
Any similarities to other tutorials are purely coincidence
Please give credit to the tutorial writer and the scrapkit creator
when using this tutorial

Things you will need to do this tutorial:
ShabbyGrunge Scrapkit By DistinctivelyAuri (Link Above)
Tube of Choice
PSP 10
Animation Shop
Alien Skin Textures

Open Tube of Choice
Duplicate and Close

Open 550 X 550 Raster Image
Open DA_SGFrame1, Copy, Paste as New Layer into your new image then close the frame

Resize your tube you are using
Copy, Paste as New Layer on your image.
Close the tube now

Open DA_SGElement1, Resize, Copy, Paste as New Layer on your new image, Close the Element.

Open DA_SGRose3, Resize, Copy, Paste as New Selection, Mine is on the Element in the bottom right hand corner. Close the Rose.

Open DA_SGRose2, Resize, Copy, Paste as New Selection, Mine is on the other rose in the bottom right hand corner. Close the Rose.

Open New Raster Layer, Move to Layer just below your Frame

Open DA_SGRose1, Resize, Copy, Paste as New Selection, Position as desired, Mine is in the left hand inner corner of the frame. Close the rose.

Select the layer with your frame on it.

Open DA_SGButterfly6, Resize, Copy, Paste as New Selection, Mine is on the left hand side of the frame. Close the Butterfly.

Open DA_SGBowWrap1, Resize, Copy, Paste as New Selection, Mine is on the upper right hand side of the frame. Close the Ribbon.

Open DA_SGButterfly5, Resize, Copy, Paste as New Selection, Mine is on the upper right hand side of the frame on the ribbon. Close the butterfly.

Open DA_SGButterfly3, Resize, Copy, Paste as New Selection, Mine is on the upper Left hand corner of the frame. Close the butterfly.

Open DA_SGEnvelope2, Resize, Copy, Paste as New Selection, Mine is on the lower left hand corner. Close Envelope.

Open DA_SGFlower2, Resize, Copy, Paste as New Selection, Mine is on the lower left hand corner on the Envelope. Close Flower.

Open DA_SGPhotoMat1, Resize, Copy, Paste as New Selection, Mine is on the lower left hand corner on the Frame. Close PhotoMat.

Open DA_SGButterfly1 Resize, Copy, Paste as New Selection, Mine are on the left side no the PhotoMat and then Mirrored on the Flower. Close the Butterfly.

Open DA_SGRose4, Resize, Copy, Paste as New Selection, Mine is on the right hand side of the frame. Close the Rose.

Go to your bottom layer.
Select only the inside of the frame.

Open DA_SGPaper6, Copy, then go to bottom layer and paste as Into Selection.

Duplicate Layer twice.

Select the first one.

Go the your effects and find the Alien Skin Textures, Default texture. Then reduce the opacity on the layer to 50.

Go to second layer and repeat but this time click Random Seed. Opacity 50

Go to third layer and repeat and click random seed again. Opacity 50

Add New Raster Layer and send to bottom. Flood Fill with whatever color you with. This will be the background to your tag.

Go to the top layer and place your watermark.

Send the 2nd and 3rd layers to the bottom.

Save as Jpeg

Send 1st layer to bottom and bring the 2nd one just in front of your background.

Save as Jpeg.

Send 2nd to the bottom and bring the 3rd one just in front of your background.

Save as Jpeg.

Open Animation Shop, open your animation wizard. Import all 3 pics into the animation shop. Save as .gif.

You’re done!
Please give credit to Auri and I for the tut and scraps!

Import all Into Letter Creator and place as desired

I hope you enjoyed this tutorial as much as I enjoyed creating it!
Brightest Blessings and Darkest Dreams

LadyRavenCreations
ÓSarah Feldsien
To get all my tutorials email saphirevixen@gmail.com and place YOUR TUTS in the subject!
Or go to http://ladyravencreationstutorials.blogspot.com/

~ TUT ANTIQUESPLEDOR SCRAP ~

TUT ~ PTU DA ANTIQUESPLEDOR Scrapkit HERE
TUT BY LADY RAVEN CREATIONS
ÓSarah M A Feldsien
This tutorial was written by myself
Any similarities to other tutorials are purely coincidence
Please give credit to the tut writer and the scrapkit creator
when using this tutorial

Things you will need to do this tutorial:
Auri’s Scrap Kit (Link Above)
Tube of Choice
PSP of Choice
LetterCreator

Open Tube of Choice
Duplicate and Close
Shrink this for now

Open DA_AntiquePaper7 Duplicate Twice and Close
Shrink One for Now

Resize new one to 420 X 420
New Raster Layer

Open your Duplicated Tube
Copy your tube then go back to background image
Paste as New Selection

Deselect (Ctrl D)

Open DA_AntiqueFrame3 and Export to Frames

GO back to your image and Add Border (Black) 10 Pixels

We are going to fill this later so leave it be
Next, Add Frame, Frame Canvas Checked, Frame Outside Image, Checked.

Add Borders (Black) (20)

New Raster Layer

Open DA_AntiqueSwirl1 Resize to desired size, Copy,

Go back to image, Paste as New Selection where desired.

I placed mine at the top on both sides on the frame.

Keep the swirl open and resized (you can close it later without saving)

as we will be using it later.

Open DA_AntiqueBookmark2, Resize as desired, Copy

Return to Image and Paste as New Selection. I pasted

mine at the bottom of the frame to make a name plate for later.

You can now close the Bookmark WITHOUT saving it.

Open DA_AntiqueCandle1, Resize, Copy, Now go to the

layer with your background on it. Paste as New Selection

and move as desire behind your tube.

You can close the Candle without saving as we will not be using it again.

Open DA_AntiqueLace3, Resize, Copy, Go to your layer with your tube on it.

Paste as New Selection, I pasted mine at the top and bottom

just along the inside edges of my frame. Be sure to delete anything

that shows outside the frame edges.

You can close the lace without closing now.

Open DA_AntiqueBrooch2, Resize, Copy, Paste as New Selection.

I pasted mine in the upper righthand corner of my frame.

You can close the Brooch now without saving as well.

Open DA_AntiqueFlower1, Resize, Copy, Go to the top layer

now of your image, Paste as New Selection, I pasted mine

to the left of the Nameplate.

Close the flower without saving.

Open DA_AntiqueFlower2, Resize, Copy, go back to your image

and Paste as New selection, I pasted mine on top of the other flower.

Close this flower without saving as well.

Open DA_AntiqueKey&Chain2, Resize, Copy, go back to your

image and Paste as New selection, I pasted mine on top of the flowers.

Close the KeyChain without saving.

Open DA_AntiqueEnvelope2, Resize, Copy, go back to your

image and Paste as New selection, I pasted mine to the right of the nameplate.

Close the Envelope without saving.

Open DA_AntiqueButterfly3, Resize, Copy, go back to your

image and Paste as New selection, I pasted mine on top of the envelope.

Close the butterfly without saving.

Now Layers, Merge, Merge Visible.

Use your Magic Wand and select the black area around the tag,

Open your background copy 2 that we made at the beginning.

Copy this. Now go back to your image, Paste Into Selection.

Deselect (Ctrl D). Place your water mark as desired.

Open your background 2 again. Open DA_AntiqueSwirl1 that we resized,

Copy the swirl. Go back to background. New Raster Layer.

Paste the swirl a few times as New Selection. Then Deselect (ctrl D).

Lower Opacity of both layers until you are satisfied.

Mine is 42 for the background and 63 for the Swirls.

Merge Visible

Save Both Graphics as JPEGS and Export to Letter Creator.

You’re Done!

I hope you enjoyed this tutorial as much as I enjoyed creating it!
Brightest Blessings and Darkest Dreams

LadyRavenCreations
ÓSarah Feldsien
To get all my tutorials email saphirevixen@gmail.com

and place YOUR TUTS in the subject!
Or go to http://ladyravencreationstutorials.blogspot.com/

~Precious Teal Scrap TUT~

TUT ~ FTU DA PRECIOUSTEAL Scrapkit HERE
TUT BY LADY RAVEN CREATIONS
ÓSarah M A Feldsien
This tutorial was written by myself
Any similarities to other tutorials are purely coincidence
Please give credit to the tut writer and the scrapkit creator
when using this tutorial

Things you will need to do this tutorial:
DA PRECIOUSTEAL SCRAPKIT BY AURI
TUBE OF CHOICE
Open a 450 X 450 Raster Image
Open Tube of Choice
Duplicate and Close

Open DA Teal Tag 1
Copy
Then Paste twice on your raster image, One in the upper left, one in the lower right

Resize your tube as preferred then Copy and Paste as New Selection into your raster image and place as desired.

Open DA TealFrame resize as desired, Copy, the Paste as New Selection in the center

Open DA TealknotRibbon2, resize, Copy and place as desire. I placed mine at the top.

Open DA Tealbraid1, resize, Copy, Paste as New Selection, I pasted mine twice, once over the ribbon and the second at the bottom

Open DA CutieFly1, resize, Copy, Paste as New selection, Mine was in the lower right hand corner.

Open DA CutieFly2, resize, Copy, Paste as New Selection, Mine is in the Upper lefthand corner.

Open DA TealFlower3, resize, Copy, Paste as New Selection, Mine is in the lower lefthand corner.

Open DA TealFlower4, resize, Copy, Paste as New Selection, Mine is in the lower lefthand corner over #3.

Open DA TealTag2, resize, Copy, Paste as New Selection, Mine is in the upper Middle.

Merge Visible

Place Watermark where desired.

Merge Visible

You can add anything behind it you want.. I left mine blank and exported it to Animation Shop to keep it transparent.

Open DA TealPaper 5
Resize to 1280 X 1280
Seamless tile ~ Multi directional ~ Corners
Save as a jpeg to be your background for your stat.

You’re done!

Import all Into Letter Creator and place as desired

I hope you enjoyed this tutorial as much as I enjoyed creating it!
Brightest Blessings and Darkest Dreams

LadyRavenCreations
ÓSarah Feldsien
To get all my tutorials email saphirevixen@gmail.com and place YOUR TUTS in the subject!
Or go to http://ladyravencreationstutorials.blogspot.com/

~GRUNGE GIRL TUT~

TUT ~ PTU DA GRUNGE Scrapkit HERE
TUT BY LADY RAVEN CREATIONS
ÓSarah M A Feldsien
This tutorial was written by myself
Any similarities to other tutorials are purely coincidence
Please give credit to the tut writer and the scrapkit creator
when using this tutorial

Things you will need to do this tutorial:
DA GRUNGE SCRAPKIT BY AURI
TUBE OF CHOICE
Open DA Grunge Scroll
Duplicate and close
Tube of choice
Duplicate and close
paste onto scroll as new selection and place where desired

DA Blackrose
Duplicate and close
Copy and copy and paste as new selection and place where desired

DA GrungeTag2 Duplicate and close
Paste as New Image Resize and rotate as desired
Copy and paste as new selection and place where desired

DA GrungeStrip resize and copy and paste as new selection and place where desired
I placed mine at the top and bottom of the tag and did not resize at all but merely moved it to 2 diff spots of the strip.


DA GrungeBow2 resize to 30%, copy then paste and place where desired once rotate 45% paste on top of other bow to create the double bow
I placed my bows at the top of the Grunge Tag

DA GrungeDoodle2 Resize, copy and paste as new selection and place where desired
I placed mine at the top right hand corner of the tag

DA GrungeButterfly Resize, rotate and copy and paste as new selection and place where desired
I placed 2, one over the doodle, resized further and placed the other in the top left

DA GrungeBookplate Resize, rotate and copy and paste as new selection and place where desired
I placed mine over the Grunge Tag2

DA GrungeParchment2 Resize, rotate and copy and paste as new selection and place where desired
I placed mine in the lower right hand corner

DA GrungeFrame2 Resize, rotate and copy and paste as new selection and place where desired
I placed mine over the parchment

Brush Phrase of your choice over first tag

Merge Visible

Place Watermark where desired

MergeVisible

Compress and Save as JPEG


Open DA GrungePaper 6 then resize 1280 X 1280
Use this as your stat background

Import all Into Letter Creator and place as desired

I hope you enjoyed this tutorial as much as I enjoyed creating it!
Brightest Blessings and Darkest Dreams

LadyRavenCreations
ÓSarah Feldsien
To get all my tutorials email saphirevixen@gmail.com

and place YOUR TUTS in the subject!

~ SPRING FEVER TUT ~

TUT ~ PTU Spring Fever Scrapkit HERE
TUT BY LADY RAVEN CREATIONS
ÓSarah M A Feldsien
This tutorial was written by myself
Any similarities to other tutorials are purely coincidence
Please give credit to the tut writer and the scrapkit creator
when using this tutorial

LEVEL ~ INTERMEDIATE

(you will need a basic understanding of where things are in PSP)

Things you will need to do this tutorial:
SPRING FEVER SCRAPKIT
Mask 0.121
Mask 09-07-swirel
Tube of Choice


First Open SF Paper 10
Duplicate twice and close
Open SF Paper 1
Duplicate once and close
Crop center of Copy1 of Paper 10 (pink)
Resize to 1280 X 525
Shrink for later use
Open Copy 2 of Paper 10 ~ Copy
Click on Copy of Paper 1
Paste as New Layer
Promote Layer 1 to background layer
Send Top layer to Bottom so dark layer is on top
Image Resize 500 X 500
Mask on top layer (pink) 0.121-Wicked
Merge Group
Merge Visible
Mask 09-07-swirel
Merge Group
New Raster Layer
Frame 2 Copy and close
Select Image again
Paste as New Selection
Place where desired
New Raster Layer
Pick Tube of choice
Copy and Close
Paste as New Selection and place where desired
New Raster Layer
Open SF Frame 4
Copy and Close
Paste as New Selection on your tag
Place where desired
Open SF Tag 5
Copy and Close
Paste as New Selection
Place where desired
Open SF Border 2
Duplicate and close
Resize to desired size
Copy
Paste on the Layer with the Pink Frame
Place as Desired
Open SF Butterfly 1
Duplicate and Close
Resize to desired size
Copy and Paste as New Selection on the Tag
New Raster Layer
Arrange ~ Send to Bottom
Flood Fill with your Pink Background
Lower opacity to 40
Merge Visible
Place watermark where desired
Merge Visible
Save as JPEG

Select Your Middle Background you made
Opacity to 60
New Raster Layer
Then Grab SF Swirls ~ The top swirl
Rotate Right
Copy
Paste Into your background
Merge Visible
Image Effects ~ Seamless Tiling ~ Edge ~ Vertical ~ Default
Save as JPEG

Import all Into Letter Creator and place as desired

I hope you enjoyed this tutorial as much as I enjoyed creating it!
Brightest Blessings and Darkest Dreams

LadyRavenCreations
ÓSarah Feldsien
To get all my tutorials email saphirevixen@gmail.com

and place YOUR TUTS in the subject!